2009 - Volume #33, Issue #1, Page #27[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]
Off-The-Shelf 3-Pt. Adapts Easily To Allis WD 45
"I knew how the WD 45 lift arms worked. I had seen a 3-pt. quick hitch in the Northern Tool catalog," says Kuch. "I knew the hitch could be mounted on the tractor and it was easy to do."
All Kuch had to do was drill holes in the quick hitch unit to match the lift arms. The difference in spacing between the quick hitch uprights and the WD 45 lift arms required Kuch to position the lift arms on the outside of the uprights on one side and on the inside of the uprights on the other side.
"I bought a rotary tiller for it to till my 30 by 15-ft. garden and a 7-ft. grader blade that I use for snow. It's much fun," says Kuch.
Contact: FARM SHOW Followup, Don Kuch, 8092 Olmway Ave., Olmsted Falls, Ohio 44138 (ph 440 235-2279; 800 231-4203; fax 440 235-2247).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.