Super Leaf Blower Built From Silage Blower

Super Leaf Blower Built From Silage Blower FARM HOME Miscellaneous 24-2-19 "My super leaf blower was made from a Kools pto-driven silage blower," says Pete Lamp, Waterloo, Ind. "I removed the infeed mechanism and took the rest to a local welding shop. They removed the tongue and installed a 3-pt. hitch hookup. They also modified the frame so the air outlet would blow along the ground. "This leaf blower works even better than I expected. We live in the woods and have tons of leaves in the fall. This machine has really cut down the time it takes to clean them out of the yard. "I pull it behind my 45 hp tractor, but I think any tractor with 20 or more horsepower would work fine. "Total cost was $525 - $80 for the blower and the rest to the welding shop for fabrication work. New commercial leaf blowers with similar capacity sell for about $800 but are not built as heavy as mine." Contact: FARM SHOW Followup, Pete Lamp, 3438 CR 24, Waterloo, Ind. 46793 (ph 219 837-4775; E-mail: lampballoon

To read the rest of this story, download this issue below or click here to register with your account number.