1996 - Volume #20, Issue #4, Page #40[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]
Conversion Kit Turns Grain Truck Into Spreader
It was such a hit at the show, the manufacturer says he's been swamped by orders from all over North America.
D & M Williams Manufacturing Ltd.'s self-contained kit consists of heavy-duty drag chains, aluminum slats, and beater bars. They slide in as a single unit and lock into position.
The kit plumbs into the truck's existing hydraulics which are more than adequate to drive the spreader unit which has four heavy-duty chains fitted with slats and dual beater bars fitted with eight 10-in. dia. blades. Chains drag on the spreader pan, not on the floor of the truck, notes the company.
Once you're finished, you can quickly remove the kit and have full use of your truck for other jobs.
Kits are available for 13 to 15-ft. long gravel boxes and 14 to 16-ft. grain boxes. Hydraulics must be installed for trucks with-out dump hoists.
Sells for $8,500 and $9,500 (Canadian), respectively.
Contact: D & M Williams Manufacturing Ltd., Box 1854, Assiniboia, Sask., Canada SOH OBO (ph 306 642-3202; fax 4214).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.