1996 - Volume #20, Issue #5, Page #12
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Poly Calf Hut With Gull Wing Vents
New vented poly calf hut comes with four "wings" on top that can be raised or lowered to adjust the amount of ventilation.The rectangular "gull wing" hut is 48 in. wide, 60 in. long, and 46 in. high and is made from high-impact, UV stabilized, opaque poly. The hinged wings mount over four ventilation holes on top of the hut and are held in the raised position by steel pins.
The hut is open at the front and has a hinged vent window on back that opens up one third of the rear wall, allowing air to flow all the way through the hut. A steel gate that supports two feed buckets attaches to the front.
The basic hut sells for $160. Bucket holders sell for $16 apiece and buckets for $5.60 apiece. The rear window vent sells for $15.
Contact: FARM SHOW Followup, Poly Dome, 62824 250th St., Litchfield, Minn. 55355 (ph 800 328-7659).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.