«Previous    Next»
Best Tailgate Ramp Ever
Many tailgate ramps for pickups have come on the market over the years but we've never seen one quite as slick as the new EZN Ramp that'll handle loads of over 2,000 lbs. yet folds up to a narrow 4 in. width inside the tailgate. It doesn't change the look of the pickup at all.
When fully extended, the EZN Ramp is 76 in. long and 56 in. wide. It consists of three 19 3/4 in. sections made out of zinc-coated steel with an anti-slip silicone car-bide working surface. Total weight is 130 lbs. To handle the extra weight of the tail-gate with the ramps installed, spring-loaded cables attach to brackets that simply slip over the hinges on the tailgate.
What makes the ramps unique is the "suspension bridge" type cable supports on the underside. As the ramp is unfolded, cables are pulled tight over stand-up brackets, providing support that keeps the sections of the ramp rigid.
"The ramp comes with two legs you can put under the outer end when extended so you can use it for a heavy-duty work table in the field," says distributor Tony Pithan.
Sells for for $795. "That's more than other ramps but you almost have to see this ramp to appreciate the quality of construction. It's made for constant use. We've had tremendous interest from commercial customers who previously used powered Tommy Lifts or other such complicated, expensive rear lifts," says Pithan.
Contact: FARM SHOW Followup, EZN Ramps, 115 W. Canon Perdido, Suite 100, Santa Barbara, Calif. 93101 (ph 800 969-7267 or 612 421-8869).

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1995 - Volume #19, Issue #3