1983 - Volume #7, Issue #5, Page #08[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]
Woodsplitter & Carrier In One
"I have the splitter attached to the carrier's framework with one bolt. I can set the splitter at any height I want and can also easily remove it as needed. When dumping the carrier, the splitter swings up and locks in an up position."
"The carrier is 6 ft. wide, 4 1/2 ft. tall, 30 in. wide and holds one rack of wood. To unload the carrier, all I have to do is disconnect the top link of the 3 pt. hitch. The box will then dump as the hitch is raised," says Enders.
The splitter is powered off the tractor's hydraulics and has a 4-in. cylinder and a 24-in. stroke. The carrier is made of plywood bolted to an angle iron frame.
Contact: FARM SHOW Followup, Delbert Enders, 67930 Gumwood Rd., Bremen, Ind. 46506 (ph 219 633-4629).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.