2024 - Volume #48, Issue #2, Page #35
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Adjustable Wrench Converted To Spanner
He considered drilling holes in a piece of metal to fit his current task but came up with a better idea.
“After striking out trying to buy one, I thought I might be able to modify one of my adjustable (crescent) wrenches and use it together with some standard metal punches,” says Garber.
He took one of his stainless-steel adjustable wrenches and drilled a hole to slide a 3/16-in. punch through each jaw.
“This makes it more of a one-size-fits-all tool for more jobs that might come up with slightly different sizes,” he says. “I wasn’t sure how they’d drill out, but the stainless steel was buttery soft.”
He says the only limitation to the improvised tool is the size of the adjustable wrench and the extent to which the jaws open, but the same process could be used with larger wrenches as well.
“If you don’t feel like spending 60 bucks on a regular spanner wrench or you can’t find one, you can do something like this for a lot cheaper. It works really well. I’m sure I’ll get more use from it in the future.”
Contact: FARM SHOW Followup, Dave Garber, 2740 Locust St., Butte, Mont. 59701 (ph 937-621-8005; garberd99@gmail.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.