You have reached your limit of 3 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
3-Pt. Boom Added To Sawmill
“Sometimes, when positioning logs on my sawmill, I need a way to lift and orient the logs. So, I decided to adapt my 3-pt. boom with a come-along to the frame of the mill,” says Mark Yax, Solon, Ohio.
“I made some brackets that hold the boom’s 7/8-in. dia. pins and these straddle the mill’s bunk, which is ma
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
3-Pt Boom Added To Sawmill WOODLOT EQUIPMENT Saws “Sometimes when positioning logs on my sawmill I need a way to lift and orient the logs So I decided to adapt my 3-pt boom with a come-along to the frame of the mill ” says Mark Yax Solon Ohio “I made some brackets that hold the boom’s 7/8-in dia pins and these straddle the mill’s bunk which is made of 2 by 2 steel tubing Where the top link would normally connect I made a bracket using a chain hook that lets me easily adjust the lifting angle of the boom “I simply attach the come-along to the end of the boom which can easily be flipped over out of the way when not needed It comes off easily if needed back on my tractor ” Contact: FARM SHOW Followup Mark Yax Valmark Tool and Machine Solon Ohio 44139 valmarktool@aol com
To read the rest of this story, download this issue below or click
here to register with your account number.
