2020 - Volume #44, Issue #4, Page #35[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]
“Handee Clamp” Holds Small Parts
The powder-coated Handee Clamp measures 10 in. long by 5/8 in. wide and comes with a sliding “jaw” on one end and an adjustable nut on the other end. The jaw opens to a little over 1 1/8 in. You slide the jaw out and place the nut, bolt or other part on it, then tighten the nut to lock the jaw in place. The jaw can handle bolts and nuts from 1/8 to 3/4 in.
According to the company, the Handee Clamp works better than a needle nose pliers because there are no handles in the way as you reach into the tight space. Also, pliers require constant pressure which you don’t need to worry about with the Handee Clamp.
Sells for $21.50 plus S&H. A zinc-coated model is also available and sells for $18.50 plus S&H.
Contact: FARM SHOW Followup, Handee Clamp, LLC, 2826 Smith Ave., Marshalltown, Iowa 50158 (ph 641 485-3868; email@example.com; www.handeeclamp.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.