«Previous    Next»
Vise Mounts On Pickup Bumper
I recently read a story in FARM SHOW about a portable bench vise that attached at hitch level to a pickup bumper. The operator had to lean over to use it. It prompted me to put together a portable bench vise that I can use while standing upright, which is much handier to use, says Mike Peters, Harmony, Minn.
  The portable vise consists of an L-shaped length of square tubing with a round flat steel plate on top. The plate has holes in it to bolt on the vise. By pulling a pin from the receiver hitch, Peters can quickly move the vise to another vehicle. It can be stored behind the pickup seat or in a toolbox.
   I already had the vise, which was originally designed to rotate on a round metal base, says Peters. I had a local welding shop put the square tubing and round plate together. Then I painted the tubing and vise yellow so that other motorists will see it whenever the pickup is parked.
  Contact: FARM SHOW Followup, Mike Peters, P.O. Box 53, Harmony, Minn. 55939 (ph 507 381-6874; mike1961@harmonytel.net).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2020 - Volume #44, Issue #2