2019 - Volume #43, Issue #1, Page #30
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
“Best Barrel Boot Scraper Ever”
 |
He used a cordless circular saw equipped with a 4-in. blade to cut off the top 3 in. of the barrel, then made a series of cuts about 3/8 in. apart around the rim and bung holes. He also made a series of long parallel cuts about 1 1/2 in. apart in the lid and turned them into “louvers”. He used a propane torch to heat the ends of the cuts, then used a vise grip to bend them and hold them in place until they hardened. He also cut a 2-in. wide strip out of a truck mud flap and used a couple of carriage bolts to fasten it onto the lid, bristle side up.
Contact: FARM SHOW Followup, Wayne M. Bryan, 5460 Turkey Hill Rd., Conesus, N.Y. 14435.
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.
