«Previous    Next»
Receiver Hitch Vise
“Many times when I’m away from my shop I’ve wished I had a vise to use on some job. So, I came up with this vise-mounting bracket that works with any standard 2-in. receiver hitch,” says Connor Bishop, Guilford, Ct.
    “I bolted a steel plate onto the vise and then welded the plate to a length of 2-in. sq. tubing. I also drilled a 5/8-in. dia. hole in the tubing to accommodate the hitch pin. Now whenever I’m away from the shop I slide the vise into the hitch, insert the hitch pin, and have a vise wherever my pickup is.”
    Contact: FARM SHOW Followup, Connor Bishop, 400 Moose Hill Rd., Guilford, Ct. 06437 (ph 203 313-5362; themadmailler@yahoo.com).


  Click here to download page story appeared in.



  Click here to read entire issue




Order the Issue Containing This Story
2015 - Volume #39, Issue #5