«Previous    Next»
T-Post "Staple" Allows Side-To-Side Movement
This new T-post “staple” holds a strand of barbed wire in position near the post, but still allows side-to-side movement if it’s bumped or stretched.
  The patented steel post attachment is made from high-tensile galvanized wire and forms a loop in the middle. You clip the staple onto one side of the post and then use a pliers to bend it around the back side of the post. No special tools are needed.
  “It lets you tighten the wire without having to loosen or remove the clip, which solves a big problem when repairing, replacing, or installing barbed wire fencing,” says Richard Hendricks, Box T Brand, LLC. “T-posts don’t rot or burn and are cheaper and faster than wooden posts. But you can’t tighten the wire without having to walk the length of the fence and remove each clip. The Steel Post Staple allows the barbed wire to slip through so you don’t need to remove anything.”
  Hendricks sells T-Post staples for 20 cents apiece plus S&H. He says Box T Brand invites contacts from potential manufacturers, distributors, and licensees. Check out the website for more information, photos and videos.
  Contact: FARM SHOW Followup, Richard Hendricks, Box T Brand, LLC, 89195 476 Ave., Atkinson, Neb. 68713 (ph 402 340-6082; boxtbrand@live.com; www.boxtbrand.com).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2013 - Volume #37, Issue #4