«Previous    Next»
Rubber Track Installation Tool
No pry bar is needed when using the Bair Products Rubber Track Installation Kit. New to the market, it makes installing rubber tracks a whole lot easier.
  “It usually takes two people to install rubber tracks using large pry bars and sledge hammers to work the tracks onto the undercarriage,” says Tonya Bair. “It’s especially hard to do with new rubber tracks that are still tight.”
  The hydraulic-powered tool does the work that pry bars and hammers used to do. It reduces the tension that normally holds the track in place.
  “One person can change tracks in 30 min. with our kit and a Porta Power jack to push the track on,” says Bair.
  Bair’s has two different sized kits for Caterpillar/ASV/Terex small compact loaders. Contact Bair for the correct kit for your loader. The kits are priced at $445.
  Contact: FARM SHOW Followup, Bair Products, Inc., 2785 W. 247th St., Louisburg, Kan. 66053 (ph 913 947-3934 or toll free 855 575-5847; info@bairproducts.com; www.bairproducts.com).

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2012 - Volume #36, Issue #6