2011 - Volume #35, Issue #6, Page #16
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Fence Ties Work With Portable Drill
 |
 |
 |
“We work with all types of fencing and offer galvanized, aluminized, stainless steel and vinyl coated ties,” says Patty Krake, LDI. “Our ties are available in 1 5/8, 1 7/8, 2 3/8 and 4-in. lengths, as well as in 6, 9 and 11-ga. steel.”
LDI also makes tools to twist 6, 9 and 11-ga. wire ties tight. Simply put the tie in place, slip the drill tool over the ends and start the drill. A standard 1/2-in., low speed, electric drill with a minimum 7-amp draw is recommended.
Each gauge requires its own tool. Tools are priced at $50 each. Ties are commonly packed in 500 count packages. Prices range from 12˘ per tie and up, depending on gauge, length and material.
“We also handle smaller orders,” says Krake. “We make up whatever size order the customer needs.”
Custom tie bending of wire from 11 ga. to 1/2-in. in diameter is available from LDI. The company also works with fence companies and suppliers to offer a wide range of other fence products, including crash gates, swing and slide gates and solar-powered gate systems.
Contact: FARM SHOW Followup, Logical Decisions, Inc., 2020 N. Sherwood Forest Blvd., Baton Rouge, La. 70815 (ph 225 274-1115; toll free 800 676-5537; patty@ldi.com; www.ldi.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.
