«Previous    Next»
Easy Way To Make Wheels Out Of Wood Scraps
Carl Boutilier, Freeport, Ohio: "I needed to make wheels for a school project and I needed them right away. I came up with a quick and easy way to make them out of wood scraps.
  "I made a T-shaped holder out of wood that slides in the groove on the table saw. The piece that extends toward the blade has holes drilled 1 in. apart in it. I just put a pin in the center of a square block of wood, fit it into a hole, and then just push the piece of wood back and forth through the saw blade, rotating it a little bit each time until it's perfectly round. This was a quick and easy way to make a wheel."

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2010 - Volume #34, Issue #3