2007 - Volume #31, Issue #6, Page #02[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]
World's Largest Corn Head Takes To The Field
"The 24/20 is designed to meet the needs of farms that keep getting larger and farmers who are demanding and expecting more from their machinery," says Jandrisch. "We did this in anticipation of where the market is heading."
In 2005 Aemsco brought out the first 16-row, 40-ft. wide header. The new 24/20 header, like the 16-row design, uses components from multiple smaller Geringhoff Northstar headers. The row units are mounted on a custom built frame. Jandrish says adapting the components to fit the 40-ft. frame was the first challenge.
The second challenge was finding a combine big enough to handle the giant header. While frame strength to handle the 13,385 lb. unit was important, it wasn't that much heavier than an OEM header. Power and capacity were the real concerns. Not only did the combine engine have to have enough power for 24 Geringhoff row units, but it also had to handle 24 rows of crop material throughput.
"The only combine we felt comfortable with was the Class 9 Lexion," says Jandrisch. "The Deere has enough capacity, but we were unsure if it had sufficient reinforcement of the feederhouse to accommodate the 24-row header. "
Assembling the header was one thing. Getting it ready for the field was another, says Jandrisch. Even with the Lexion, Aemsco engineers were unsure if the feeder housing would have enough power to raise and lower the header. Not until it entered the field in Ohio did Jandrisch know for sure how it would do.
"The first 24/20 went to Mark Schaffer from Norwalk, Ohio," he explains. "While we had complete confidence in the engineering and design, we were all very anxious and nervous about how the header would ultimately perform. After almost a week of use, Mr. Schaffer reported that it had been performing almost flawlessly. He had 6 semi trailers running to keep up with the combine and header."
Jandrisch reports that a few adjustments were needed. Lift cylinders were reworked to increase feeder house lift capacity. The auger rpm had to be increased and more aggressive "crop transfer fingers" had to be installed on the header to improve crop flow.
He adds that one of the exciting things about the new header is its ability to maintain maximum throughput at slower ground speeds. While an operator might have to drive faster to maintain volume with a smaller header, the 24/20 lets a combine slow ground speed.
"At 6 to 7 mph, cobs are bouncing all over," he says. "With the 24/20, you can slow down to 4 1/4 miles per hour. You'll still have as much crop or more coming through with less stress on the header, the combine, the crop and the operators. And support trucks won't have to slow down either."
To increase interest and affordability Geringhoff is offering a 20 percent discount on the $178,000 2008 price. Net retail price with the introductory offer is $142,400.
Contact: FARM SHOW Followup, Aemsco, Inc., P.O. Box 490, 205-46th Ave. N.E., Minot, N. Dak. 58701 (ph 701 852-1876; fax 701 838-3595; info@ aemscoinc.com; www. aemscoinc.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.