«Previous    Next»
Sharpening Guide For Law Mower Blades
"You can sharpen blades easily and professionally every time with this low-cost attachment," says Larry Greenquist, inventor-manufacturer of "Shur-Guide", a blade-holding device for sharpening rotary lawn mower blades with your bench grinder.
You place the Shur-Guide, with blade aligned and attached, to the left side of the grinder for clockwise-turning blades, and to the right side for counter-clockwise turning blades.
Once the blade is properly aligned and secured in holder, you sharpen one end by moving the guide back and forth on the bench, with blade pressure against the grinder wheel. After sharpening one end, you don't have to change the bevel angle or horizontal alignment settings. Just rotate the blade one half turn and sharpen the other side.
Designed to handle all types of blades for rotary lawn mowers, regardless of center hole diameter, the Shur-Guide sells for $24.95.
For more information, contact: FARM SHOW Followup, Larry Greenquist, Rt.1, Box 402, Fergus Falls, Minn. 56537 (ph 218 736-5368)

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1987 - Volume #11, Issue #4