«Previous    Next»
Chain Oiler For Round Balers
Bayard G. Young, Elkwood, Va.: "Here's an easy way to change your own oil and filters and do other under-body work. I wish I had built this car rack years ago.
  "The ramp is 15 ft. long and made out of treated lumber, with 2 by 8's for the main ramp boards and 4 by 4's for the uprights. The front post is 22 in. high and I put a stop block at the front of each ramp. The uprights on each side are staggered to balance the load and there are cross boards for strength. I used steel cable to brace the center of the ramp, running between posts on either side.
  "When the ramp is not in use, I can just lift it up and store it on its side."


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2005 - Volume #29, Issue #1