«Previous    Next»
Electric-Operated Cement Mixer Converted to PTO-Driven Model
I converted an electric-operated cement mixer to a pto-driven model that I use with my Allis-Chalmers CA tractor. The mixer mounts on a pallet and is belt-driven off a pto driveline that runs under the mixer. The driveline has a pulley at one end. If I want I can mix cement on the way to the job, just like a cement mixing truck does. It comes in handy for pouring cement around posts when building fences. When unloading, the cement falls onto a piece of tin roofing mounted at an angle on one side of the pallet. It saves a lot of wheelbarrow work.
  I converted an oxygen tank into a 12-in. dia., 18-in. long bell that I gave to my wife, Virginia, last year on Valentine's Day. It's painted white with big red hearts on it and hangs from our front porch. I got the tank free from a company that refills oxygen tanks. I used a bandsaw to cut off part of the tank and a stainless steel rod with an electric welder to write my wife's name on the tank, and then I used a hand grinder to round off the letters. A pin out of an 844 cu. in. diesel engine serves as the clapper inside the bell. It locks onto a chain that's attached to a bolt at the top of the tank. A leather strap hangs down out of the bell in order to ring it. It makes a sound much like a church bell. My wife loves it. Robert Gibson, 29176 S. Barlow Rd., Canby, Oregon 97013 (ph 503 651-2800)


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2003 - Volume #27, Issue #4