«Previous    Next»
Truck Mounted Ladder Works At Any Angle
"This truck-mounted ladder is designed so you can use it whether the truck box is up or down so it's easy to clean out the box," says Dave Bryden, Arborfield, Sask.
The 5-ft. long ladder is about 1 ft. wide at the top and flares out to about 3 ft. wide at the bottom. The sides of the ladder are made from 1-in. dia. steel tubing. The curved rungs are made from 3/4-in. steel rods. When the box is in the horizontal position, the left side of the ladder is straight up and down. When the box is in the raised position, the right side of the ladder is straight up and down.
Contact: FARM SHOW Followup, Dave Bryden, Box 91, Arborfield, Sask., Canada S0E 0A0 (ph 306 769-8631).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1997 - Volume #21, Issue #2