«Previous    Next»
Hydraulic Powered Air Compressor
Well-known hydraulic-system consultants Kanamak Hydraulics of Garden City, Kan., says its new portable hydraulic-powered air compressor is much easier to handle and more trouble-free than standard gas engine portable compressors.
The new compressor is perfect for powering hand tools and will operate up to a 3/ 4-in. impact wrench, according to company representative Randy Friesen. The unit is compact - weighs only 98 lbs. Requires a hydraulic flow of 4 to 8 gpm and has hydraulic safety valves to prevent overspeeding or reverse operation. The twin cylinder compressor is belt-driven by a gear-type hydraulic motor. Puts out 8.4 cfm at 90 psi. A hose rack holds 12-ft. of 1/2-in. hydraulic hose plus 35 ft. of 3/8-in. air hose.
Optional brackets mount the unit on a tractor 3-pt. Larger compressors also avail-able.
Sells for $725.
For more information, contact: FARM SHOW Followup, Kanamak Hydraulics, P.O. Box 575, Garden City, Kan. 67846 (ph 800 473-5843 or 316 275-6055).

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1991 - Volume #15, Issue #1