Adjustable Welding Table Mounts On Pipe

Adjustable Welding Table Mounts On Pipe FARM SHOP Welders/Torches (64) 21-2-34 Steve Matthews, Berthoud, Colo.: Steve made a nifty adjustable welding table that mounts on a 4-in. pipe in his shop. An old corn chopper flywheel, which is about 4-ft. in dia., slips up and down on the pipe which is cemented in the floor and runs up to the roof. Steve made a locking collar out of a piece of pipe so he can lock it in place at any height. "It makes a dandy welding table because it spins like a lazy Susan," notes Steve. He also slipped a large disc blade onto the pipe and welded it in place above the flywheel to hold tools.

To read the rest of this story, download this issue below or click here to register with your account number.