1996 - Volume #20, Issue #6, Page #12
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Waterproof Auger Hopper Cover
 |
The cover is made from 18-oz. vinyl-coated nylon. It's held up at the center by an adjustable, telescopic aluminum rod that stands on the bottom of the hopper. The top of the pole fits through a grommet in the cover. You telescope the pole to raise the cover to the desired height and then use a thumb screw to lock it in place. A cotter pin inserts through the top of the pole to ensure that the cover and pole always stay together. A shock cord sewn into the hem at the bottom of the cover is used to snap the cover over the edge of the hopper.
Comes in five different sizes to fit most popular brands of auger hoppers. Sells for $50 to $100 depending on size.
Contact: FARM SHOW Followup, Rainbow Industries, Inc., 5975 E. National Rd., Box 506, So. Vienna, Ohio 45369 (ph 800 388-8277 or 937 323-6493).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.
