«Previous    Next»
Keeper Keeps Pins From Jumping Out
You won't have to worry about pins jumping out of hitches when you in-stall the new "Pin Keeper" on your implement hitches.
Manufactured by K & M Mfg., Renville, Minn., the Pin Keeper is a spring loaded lever that keeps pins in place. The uni't's welded to the implement hitch and positioned so the edge of the lever is centered across the draw pin hole.
With the pin in, and the lever in position, there's no way for the pin to come out without you first moving the lever to the side by first lifting up and then turning the handle.
Pin Keeper works with any type of draw pin. A key advantage, besides the safety feature, is that you don't have to spend time looking for clip pins or clip pin holes.
Sells for $6.75, plus shipping.
For more information, contact: FARM SHOW Followup, K & M Mfg. Co., Renville, Minn. 56284 (ph toll free 800 328-1752; in Minn. 800 992-1702).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1986 - Volume #10, Issue #2