1981 - Volume #5, Issue #6, Page #29[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story | Read this issue]
Slick Way To Fill Planter Boxes
Partners Tom Trutna, Al Mittan and Gary Hellrich, built their first "Qwik-Fill" hopper system for a local farmer who was concerned not only about losing chemicals in the wind when filling boxes, but also about exposing himself to the dangerous chemicals as the dust blew around.
"We can virtually eliminate the dust and grime associated with planter box filling," says Tom Trutna. "The airtight hopper is connected by flexible hose with quick-connect couplers to the intakes on the special lids. The flow is controlled by a ball valve at the base of the hopper, delivering the flow directly into the boxes."
When full, the hopper holds about 28 cu. ft. of granular chemicals,which translates to about 1,000 lbs., or 20 bu. of seed. "The special airtight lids which are used for insecticide boxes to cut down on dust are not necessary on the planter seed boxes
because there's less dust," explains Trutna.
The hoppers, which are painted in red or green, bolt quickly to the tractor loader bucket with a bracket that fits over the upper lip of the bucket. A safety bracket is also available which maintains a set height for the tractor loader and prevents it from falling while you're working beneath it.
The hopper sells for $1,200, plus $75 per row for the lids. The unit comes with a fill hose about 5 ft. long. Longer hose is available for filling more boxes at once.
For more information, contact: FARM SHOW Followup, T-A-G Manufacturing, Inc., Valparaiso, Neb. 68065 (ph 402 784-2987 or 470-2013).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.