«Previous    Next»
Peel & Stick Roll-On Roofing
You can roof, reroof or patch low-slope roofs with this easy-to-use roll-on roof material that's designed to handle nearly any roofing job.
Peel & Seal is a self-adhering, aluminum-faced roll roof material that you apply by peeling off the paper backing and simply sticking it down to any clean, dry surface, including old asphalt that's been cleaned of loose granules, says MFM Building Products Corp. It's made of two layers of high-strength polymer film backed with 40 mil. rubberized asphalt and faced with reflective aluminum foil. The combination of various layers makes it watertight, resistant to UV radiation, and it keeps rooftop temperatures up to 22 1/2 percent cooler thanks to the reflective surface.
All you need to install it is a utility knife and small hand roller.
Comes in 4, 6, 9, 12, 18, and 36-in. wide by 33 ft. long rolls, starting at $12 per roll.
Contact: FARM SHOW Followup, MFM Building Products Corp., P.O. Box 340, Coshocton, Ohio 43812 (ph 800 882-7663 or 614 622-2645; fax 6161).

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1996 - Volume #20, Issue #4