«Previous    Next»
Wear Guard For Deere Drill
"We're also selling a `wear guard' to fit over the lower wear guard on Deere LZ and 9300 drills. Dealers would like you to replace the entire boot for about $42 apiece with a new point, not including the labor to do the job. Our wear guards eliminate the need to remove and replace the units and makes them better than new. We use a stainless chrome alloy, which is three times more dense and abrasion resistant than ordinary steel. We replace the worn part in front of the boot with a 1/4-in. dia. `nose guard' rod and repair the worn underside of the boot with a 1/8-in. thick, 1 1/2-in. wide strip. The cost is $6.95 per pair of boot guards that fit only Deere drills. As with rebuilding points, farmers send us their worn parts and we rebuild them and ship them back." (Contact: K-Tech, HCR 1, Box 69, Grainfield, Kan. 67737).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1993 - Volume #17, Issue #4