«Previous    Next»
Adapt-A-Hitch Converts Plows To On-Land
Thanks to the new "Adapt-A-Hitch," you can convert older International 550, and Deere 135 and 145 series plows to on-land plowing, keeping your tractor wheels out of the furrow for better traction.
The conversion hitch, manufactured by Star Mfg. Co., Freeport, Ill., was originally designed to assure proper center line draft when using the company's moldboard-to-chisel conversion kit, explains Skip Lehnard, marketing manager. However, the company discovered there's a good demand for the hitch to convert plows to on-land use.
The Adapt-A-Hitch takes less than3 hours to install. It bolts to the frame using the same bolt hole pattern that's on the hitch but moves the entire hitch over so the tractor's out of the furrow. For example, on an International 550 plow, the hitch and stabilizer bar are removed, the Adapt-A-Hitch bolted to the frame and the hitch assembly and stabilizer bar mounted back on the plow. No other plow modifications are needed.
Adapt-A-Hitch sells for $39.50 to $99.50, depending on the plow make.
For more information, contact: FARM SHOW Followup, Star Mfg., Co. 1801 S. Ihm Blvd., Freeport, Ill. 61032 (ph 815 235-7750).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
1987 - Volume #11, Issue #1