Fence Bracing Hardware
 ✖  |
We'd like to announce that we've taken over manufacturing of Quik S' Port fence bracing hardware, which has been featured in previous issues of FARM SHOW. This compression-type hardware can be used to brace steel T-posts as well as 1 1/4 by 1 1/4-in. fiberglass T-posts and 1-in. round fiberglass posts. It consists simply of a sleeve and a bracing hinge which can be installed using only a post driver and a hammer. A corner brace can be erected in about 10 min., and an in-line or end brace requires even less time. A corner brace kit sells for under $16. An in-line or end post kit sells for under $9. (Dave Knapp, Wis Pro Inc., P.O. Box 149, Mineral Point, Wis. 53565 ph 800 987-3874 or 608 987-3348)
Click here to download page story appeared in.
Click here to read entire issue
Fence Bracing Hardware FENCING Miscellaneous 18-4-37 We'd like to announce that we've taken over manufacturing of Quik S' Port fence bracing hardware, which has been featured in previous issues of FARM SHOW. This compression-type hardware can be used to brace steel T-posts as well as 1 1/4 by 1 1/4-in. fiberglass T-posts and 1-in. round fiberglass posts. It consists simply of a sleeve and a bracing hinge which can be installed using only a post driver and a hammer. A corner brace can be erected in about 10 min., and an in-line or end brace requires even less time. A corner brace kit sells for under $16. An in-line or end post kit sells for under $9. (Dave Knapp, Wis Pro Inc., P.O. Box 149, Mineral Point, Wis. 53565 ph 800 987-3874 or 608 987-3348)
To read the rest of this story, download this issue below or click
here to register with your account number.
