You have reached your limit of 5 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Post Driver For 2 By 4's
You can drive treated 2 by 4's into the ground for posts with this simple adapter that protects the top of the post from splintering.
The driver consists of a piece of channel iron that slips over the post to hold it in place. A piece of 3/8-in. thick steel plate is welded to one end and a solid steel shaft welds
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
Post Driver For 2 By 4's FENCING Tools 20-4-12 You can drive treated 2 by 4's into the ground for posts with this simple adapter that protects the top of the post from splintering.
The driver consists of a piece of channel iron that slips over the post to hold it in place. A piece of 3/8-in. thick steel plate is welded to one end and a solid steel shaft welds to the top of that. You drive the shaft with a fencepost driver, just like you would drive a steel fencepost.
"Works great for reinforcing a fence, putting up a trellis, and other jobs since 2 by 4's are cheap," says Hoffman Machine & Welding, which sells the post driver for $29.95.
Contact: FARM SHOW Followup, Hoffman Machine & Welding, W. Illinois Rt. 16, Nokomis, Ill. 62075 (ph 217 563-7623).
To read the rest of this story, download this issue below or click
here to register with your account number.
