Clean Grass Clippings From Mower Deck
 ✖  |
Steve Dietrich, Morton, Ill.: “Here’s a great way to remove stuck-on grass clippings from under a mower deck. Over the years, I’d lie underneath with a scraper, trying to knock off the hard, baked-on grass, and I’d often hit my knuckles on sharp edges. But now I use an oscillating vibrating tool with a scraper blade in it.
“The one I use is a 5-speed variable, 20-volt Harbor Freight Bauer, which is a step above. I usually use low speed, but if the debris is difficult, I can easily go higher. I like this one because it has a headlight. It’s dark under the mower deck without some extra light. It works for me.”
Click here to download page story appeared in.
Click here to read entire issue
Steve Dietrich, Morton, Ill.: “Here’s a great way to remove stuck-on grass clippings from under a mower deck. Over the years, I’d lie underneath with a scraper, trying to knock off the hard, baked-on grass, and I’d often hit my knuckles on sharp edges. But now I use an oscillating vibrating tool with a scraper blade in it.
“The one I use is a 5-speed variable, 20-volt Harbor Freight Bauer, which is a step above. I usually use low speed, but if the debris is difficult, I can easily go higher. I like this one because it has a headlight. It’s dark under the mower deck without some extra light. It works for me.”
To read the rest of this story, download this issue below or click
here to register with your account number.
