You have reached your limit of 3 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Post Driver Used To Remove T-Posts
A T-post removal hack caught our attention recently because of its simplicity. It uses the same post-hole driver that’s used to install T-posts.
For a quick, 2-min. lesson, check out the gardener demonstrating the technique on YouTube. Search for “removing a T-post with a post driver.”
Place the driver wi
..........
You must sign in, subscribe or renew to see the page.

You must sign in, subscribe or renew to see the flip-book
Post Driver Used To Remove T-Posts FENCING Fence Systems A T-post removal hack caught our attention recently because of its simplicity It uses the same post-hole driver that’s used to install T-posts For a quick 2-min lesson check out the gardener demonstrating the technique on YouTube Search for “removing a T-post with a post driver ” Place the driver with the solid end down on the ground about a foot from the T-post Slip the open end under one of the post’s notches Then shove or pull the post against the driver until it lifts slightly out of the ground Straighten the post reset the driver in another notch and repeat the process until the T-post is out of the ground The technique is similar to using a car jack
To read the rest of this story, download this issue below or click
here to register with your account number.