2020 - Volume #44, Issue #5, Page #26
[ Sample Stories From This Issue | List of All Stories In This Issue | Print this story
| Read this issue]
Bolt-On Polaris Ranger Lift Kit
The 2 1/2-in. lift kit is designed for mid and full-size 2009 – 2020 Ranger models equipped with front strut suspension and bolts on with basic hand tools. The kit includes zinc-coated hardware, aluminum spacers, nylon nuts, and steel rear triangle brackets.
“All components are solidly welded together out of the box. You don’t have to bolt any of them together like you do with some other kits on the market,” says Burke. “Any time you have to bolt lift kit components together there’s the risk they’ll eventually loosen up and move, which will make them more likely to break. My solid components may cost more at first, but in the long run they’ll hold up.”
Burke says his lift kit allows hauling heavier loads while also maintaining good ground clearance, which allows you to drive through deep ruts or on uneven ground without getting hung up. Another advantage is that you can fit your UTV with larger tires. “You don’t need wheel spacers or aftermarket wheels with my kit, but you can use them if you want to.”
He says the kit is designed to work well within the factory suspension’s articulation. “Some other lift kits on the market provide too much lift, which can destroy the CV boots and joints and also cause the vehicle to ride rough,” says Burke. “If you want to raise the vehicle more than 2 ½ in., you’re better off just replacing the CV boots and joints with bigger ones. My kit works within the angle limits of the factory CV boots and doesn’t change the quality of the ride at all.”
Burke says he prides himself on customer service. “I’m a one-man operation with a farm background, and I make my products by hand in my shop. I’m known for making a great product with great customer service, and I work 7 days a week so I’m always on call to help the customer.”
The Marshall Motoart lift kit sells for $188 including S&H. You can view the kit on YouTube or on the company website, which includes installation instructions.
Contact: FARM SHOW Followup, Chris Burke, 4879 S. 1900 W., Roy, Utah 84067 (ph 801 791-4616; marshallmotoart@gmail.com; www.marshallmotoart.com).
Click here to download page story appeared in.
Click here to read entire issue
To read the rest of this story, download this issue below or click here to register with your account number.