2018 - Volume #BFS, Issue #18, Page #80
Sample Stories From This Issue | List of All Stories In This Issue  | Print this story  | Read this issue]

    «Previous    Next»
Feed-Saving Bulk Bin
“Our new Series 45 feed bin is built from a one-piece rotational molded tank and stands on a strong steel frame with fork pockets. It lets smaller producers save money by purchasing feed in bulk and results in less feed loss due to rodents,” says Tom Campbell, Richfield Industries, South Flint, Mich.
  The 45-bu. bin stands 85 in. tall, 48 in. wide, and 54 in. deep making it small enough to fit in back of your pickup. It comes with a one-piece stand, a weather-tight lid, and a 9-in. grain door. A stainless steel chute below the door is designed to feed into a standard 5-gal. pail.
  Many options for the bin are available, including a 2-piece stand that allows additional containers to be stacked while grinding feed or having feed delivered. Custom base heights can also be fabricated.
  The Series 45 with a one-piece stand sells for $1,750 and is available from any Do It Best hardware store.
  Contact: FARM SHOW Followup, Tom Campbell, Richfield Industries, 3020 Airpark Dr., South Flint, Mich. 48507 (ph 810 233-0440; extension 1253 or fax 810 767-5637; www.agcontainer.com; Orders@Agcontainer.com).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2018 - Volume #BFS, Issue #18