You have reached your limit of 3 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
He Added Steps To His Ford Pickup
John Herren made it easier to access the bed of his F-350 4-WD pickup by adding steps that look like they could have been part of the truck’s design.
“The top of the bed is 39 in. from the ground,” he says. “So I made steps to slip into the hitch so I can reach over the tailgate or climb in the bed with the ga
..........
You must sign in, subscribe or renew to see the page.
You must sign in, subscribe or renew to see the flip-book
He Added Steps To His Ford Pickup AUGERS John Herren made it easier to access the bed of his F-350 4-WD pickup by adding steps that look like they could have been part of the truck’s design “The top of the bed is 39 in from the ground ” he says “So I made steps to slip into the hitch so I can reach over the tailgate or climb in the bed with the gate down ” He used 20-in long pieces of 2 1/2-in square tubing to reach the sides of the trucks and welded on 8 by 10-in steps made of 1 1/2-in tubing covered with aluminum deck plating “The steps are easy to take off You just pull a cotter pin to remove ” Herren says Since there is plenty of clearance he leaves the steps on People have commented that they look great and Herren appreciates the convenience of being able to step up for easier access to his pickup bed Contact: FARM SHOW Followup John Herren P O Box 72069 Louisville Ky 40272 ph 502 741-7521; jrherren31@yahoo com
To read the rest of this story, download this issue below or click
here to register with your account number.
