Chainsaw Stand Eliminates Clutter
“My four chainsaws and the oil and fuel needed for them were cluttering up my shop floor, so I built a chainsaw stand to keep everything organized. It cleared up a lot of floor space,” says Dave Neil, New London, Iowa.
The 38-in. tall stand is 2 ft. wide and 1 ft. deep. Neil used 1-in. square tubing for the frame and 1/16-in. thick sheet metal for the shelves and a partially-enclosed back side.
“I store the saws on one side of the shelves and the oil and fuel cans on the other side. The chainsaw bars extend through a gap out the back so they’re always out of the way,” says Neil.
Contact: FARM SHOW Followup, Dave Neil, 2920 Quaker Ave., New London, Iowa 52645 (ph 319 367-5690).
Click here to download page story appeared in.
Click here to read entire issue
Chainsaw Stand Eliminates Clutter WOODLOT EQUIPMENT Chain Saws “My four chainsaws and the oil and fuel needed for them were cluttering up my shop floor so I built a chainsaw stand to keep everything organized It cleared up a lot of floor space ” says Dave Neil New London Iowa The 38-in tall stand is 2 ft wide and 1 ft deep Neil used 1-in square tubing for the frame and 1/16-in thick sheet metal for the shelves and a partially-enclosed back side “I store the saws on one side of the shelves and the oil and fuel cans on the other side The chainsaw bars extend through a gap out the back so they’re always out of the way ” says Neil Contact: FARM SHOW Followup Dave Neil 2920 Quaker Ave New London Iowa 52645 ph 319 367-5690
