«Previous    Next»
Mobile Air Splitting Manifold
“One day two of my sons each had projects going outside where they needed compressed air, sharing one large line from the compressor in my shop. When I asked if I could use the hose to air up my trailer tires, they both said ‘No!’ at the same time,” says Gary Swensen, Yankton, S. Dak.
    “So that’s when I got the idea for a mobile air splitter that we could carry outside and connect air lines for multiple projects. One large line goes in the end of the splitter and 6 lines out are fitted with quick couplers.
    “This kind of manifold needs to be built extremely heavy-duty. I used a large piece of heavy-gauge pipe with ends welded in place and holes drilled in the sides for the pipe fittings. I added a handle to make it easy to carry and added a couple small legs to hold it off the ground. No more sharing and swearing, and no need to run separate air lines for each project.”
    Contact: FARM SHOW Followup, Gary Swensen, 1408 Sunrise Drive, Yankton, S. Dak. 57078 (ph 605 660-3489; g_swensen@msn.com).



  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2018 - Volume #42, Issue #3