«Previous    Next»
“Side Dump” Grain Cart
“With no pto and no augers or flighting to wear out, our new side dump grain cart will greatly reduce maintenance costs. And kernel damage will be minimal,” says Dana Ienn, Feeding Systems, LLC, Columbus, Neb. The new-style cart was on display at the recent Husker Harvest show near Grand Island, Neb.
  The side dump grain cart operates off tractor hydraulics and is equipped with 4 large hydraulic cylinders - 2 to raise and lower the box and 2 to tilt and dump it. It’s available in 3 different models with 900 to 1,100 bu. capacity. The 2 larger models can be mounted on either tracks or wheels.
  “These carts operate on the same principle as the stationary carts we’ve sold for years to load feed trucks used by feedlot operators,” says Ienn. “The 900-bu. wheeled model is designed to handle silage, while the 1,100 bu. model that rides on tracks can handle silage as well as shelled corn and earlage. It can unload 1,100 bu. of high moisture corn in only about one minute.”
  The side dump grain carts sell for $65,000 to $120,000. An optional hydraulic-operated grain cart trailer is available to save wear and tear on tracked models.
  Contact: FARM SHOW Followup, Feeding Systems, LLC, 2500 E. 23rd St., Columbus, Neb. 68601 (ph 402 564-1400; danai@sidumpr.com; www.feedingsystems.biz).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2017 - Volume #41, Issue #6