2017 - Volume #BFS, Issue #17, Page #15
Sample Stories From This Issue | List of All Stories In This Issue  | Print this story ]

    «Previous    Next»
New Rocket Stove Takes Wood Heat To New Level
Rocket heater stoves have been around for a long time, but Sky Huddleston and his father, Phillip, have designed and manufactured the first stove that meets UL standards. The Liberator rocket heater installs like a conventional wood stove, but uses less fuel.
“We set out to fill a void to make a rocket
heater that is NRTL-listed and uses sticks and small fuel sources to heat houses very inexpensively,” says Sky. While many rocket heaters are mass heaters enclosed in concrete or stone, the Missouri entrepreneurs wanted something simpler for customers to install. With a sideways burn, fuel is fed from the top, and the stove reaches 600 degrees in less than 5 minutes. By using a lot of air, rocket heaters burn fast to efficiently use all the fuel’s volatile compounds resulting in a low exhaust temperature (less than 300 degrees) and no smoke.
The 165-lb., 3-ft. tall steel stove has cooling fins to radiate heat. While the stove
requires refueling every hour or so, the Huddlestons have a pellet hopper for the heater. One bag of pellets lasts over 10 hours. They also have an outside intake air adapter to further increase the stove’s efficiency.
The Huddlestons manufacture the stoves themselves with U.S-made A36 hot-rolled steel. The current price is $1,500. Videos on the Liberator website show how the heater works.
Contact: FARM SHOW Followup, Liberator LLC, 350 Farris Spur, Bourbon, Mo. 65441 ph (573) 468-4043; www.rocketheater.com; smhuddleston@rocketmail.com).


  Click here to download page story appeared in.



To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2017 - Volume #BFS, Issue #17