«Previous    Next»
He Mills Corn With Garbage Disposal
Jed Van Der Zwaag needed a way to make a small amount of chicken feed from shelled corn, and a garbage disposal was his solution.
  “It cracks kernels down to about 1/8-in. in size,” says Van Der Zwaag. “I had been looking for a small corn grinder and this will do about half a 5-gal. bucket of corn at a time. If I do more than that, it overheats and kicks out.”
  Half a bucket of corn is just right for his small flock of 10 layers and 11 broilers. This way, the feed is always fresh.
  Van Der Zwaag salvaged other components for the mini-mill. Steel rods from two lawn mower grass catching bags were welded together for a stand. The hopper for the shelled corn was made from a piece of used chimney roof flashing tin.
  “It was easy to do with stuff I had laying around, and it works great,” says Van Der Zwaag.
  Contact: FARM SHOW Followup, Jed Van Der Zwaag, 4091 Larch Ave., Hospers, Iowa 51238 (ph 712 441-2664; zwaag1@gmail.com).



  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2016 - Volume #40, Issue #3