«Previous    Next»
Lift Kit For Polaris Rangers
“Our new lift kit for Polaris Ranger utility vehicles provides 2 1/2 in. of extra lift. It’s built with quality and is easy to install,” says Chris Marshall Burke, Marshall Motoart, West Haven, Utah.
  The bolt-on lift kit is designed for all makes and models of Polaris Rangers. It includes strut spacer brackets that raise the struts and springs on the front and rear suspension.
  “The kit is a practical way to raise the vehicle’s suspension, boosting ground clearance and providing room for bigger tires,” says Burke. “Many of the lift kits on the market are bolt-together, but we weld our kit for maximum strength and performance. No wheel spacers or extra parts are needed. The kit doesn’t change your ride quality and is designed to work well within the factory suspension articulation. Some other lift kits on the market give you too much lift which can destroy CV’s and make the Ranger ride stiff.
  “Our lift kit works within the angle limits of the stock CV’s and doesn’t change the ride quality at all. You don’t need wheel spacers or aftermarket wheels with our kit, but you can add them if you want to.”
  The lift kit sells for $188.95 plus $16.95 S&H
  “We build the kit here in our shop, so everything is always in stock and we can ship out the same day ordered,” notes Burke.
  You can view the Marshall Motoart lift kit on YouTube or their website, which includes installation instructions.
  Contact: FARM SHOW Followup, Chris Marshall Burke, 2377 S. 1900 W., West Haven, Utah 84401 (ph 801 791-4616; marshallmotoart@gmail.com; www.marshallmotoart.com).



  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2015 - Volume #39, Issue #1