«Previous    Next»
Simple Clamp-On Bucket Forks
“I built a set of clamp-on pallet forks for my compact loader tractor. They fasten to the lip of the bucket with 1/2-in. set screws, which makes attaching and removing the forks a fast and easy job,” says Cory Pleschourt, Northfield, Minn.
  The forks are made out of 1 by 2-in. rectangular tubing and have angle iron brackets welded to them made out of 3 by 3 by 1/2-in. steel. A pair of 5/16-in. thick metal spacers are welded to the underside of the bucket to keep the forks level.
  “It takes only about 30 seconds to loosen the set screws and take the forks off,” notes Pleschourt.
  Contact: FARM SHOW Followup, Cory Pleschourt, 15376 Falk Ave., Northfield, Minn. 55057 (ph 507 330-5113; cory.pleschourt@us.bosch.com).


  Click here to view page story appeared in


  Click here to read entire issue



To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2014 - Volume #38, Issue #1