«Previous    Next»
Aluminum Wheel Spacer For Deere Gators
“They let you travel down 30-in. rows without running over the crop,” says Jeff Vosberg, Vosberg Enterprises, about the company’s new aluminum wheel spacers for Deere Gators.
  The 6-in. dia. solid aluminum spacers come with hardware to bolt to the wheel hub and are available in 2 or 4-in. widths. The wheel’s original bolts are used to bolt the wheel rim to the spacer.
  “The spacers move the wheel hub face out enough so you don’t have to be as particular about where you drive,” says Vosberg. “Without the spacers you can center up the Gator on 30-in. rows, but that leaves only a few inches on each side of the wheels. As a result, you spend more time watching where you’re going than paying attention to what you’re doing.
  “Our spacers really help when spraying fence rows or picking up rocks. They mount with the same number of bolts and the same spacing, so the wheel’s looks aren’t affected at all.”
  The 2-in. spacer retails for $400 plus S&H; the 4-in. spacer for $760 plus S&H.
  “The 4-in. spacers can be used on some older Gator models, but not on the newer models because the wheel would rub against the vehicle’s front fender,” notes Vosberg.
  Contact: FARM SHOW Followup, Vosberg Enterprises, Inc., P.O. Box 176, Farnhamville, Iowa 50538 (ph 800 362-8753 or 515 544-3635; jeff@buskellc.com; www.vei1.net).

  Click here to download page story appeared in.

  Click here to read entire issue

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2013 - Volume #37, Issue #2