«Previous    Next»
Deere Slide A Hit On Minnesota Lake
Grown men who would never go down a water slide might be tempted to try out David Seifert’s slide. The giant slide rolls on Deere tires and is shaped like a tractor with a big tube slide at one end.
    “It’s all scrap tubing,” says Seifert, who works in a machine shop and farms with his father near Pelican Rapids, Minn. “It probably has at least a ton of steel in it.”
    He welded the 22 1/2-ft. “tractor” frame together and bolted the slide to the deck at about 11 ft. off the ground. He bolted the bottom of the frame to salvaged tractor axles. There’s even room for a tractor seat swing under the “tractor” deck. A hitch on the front allows Seifert to back the big rig down into the water using a real Deere tractor. A sump pump in the lake brings water up to the top of the slide to make it slippery and fast.
    The tractor slide has been a big hit since he built it in 2010.
“I built it for my grandsons, Preston and Daniel. There are two more on the way,” Seifert says.
    Seifert admits it took more time (250 hrs.) and money ($800 for the spiral slide) than he anticipated. “I put a lot of work into it, but it was a lot of fun,” he says.
    Contact: FARM SHOW Followup, David Seifert, 47476 U.S. Hwy. 59, Pelican Rapids, Minn. 56572 (ph 218 863-1202; moondancertam@yahoo.com).


  Click here to download page story appeared in.



  Click here to read entire issue




To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2013 - Volume #37, Issue #1