You have reached your limit of 3 free stories. A story preview is shown instead.
To view more stories
(If your subscription is current,
click here to Login or Register.)
Improvements Made On 1951 Deere AR
Here are a couple improvements I made on my 1951 Deere AR I thought FARM SHOW readers might be interested in.
I added foot controls so I can operate the tractor's hand clutch and steer at the same time. That makes it easier to I can operate the front end loader.
I used an old Deere 46A loader. The loader ar
..........
You must sign in, subscribe or renew to see the page.

You must sign in, subscribe or renew to see the flip-book
Improvements Made On 1951 Deere AR TRACTORS Loaders 20-1-37 Here are a couple improvements I made on my 1951 Deere AR I thought FARM SHOW readers might be interested in.
I added foot controls so I can operate the tractor's hand clutch and steer at the same time. That makes it easier to I can operate the front end loader.
I used an old Deere 46A loader. The loader arms had to be narrowed up to fit the tractor. I made gussets for the tractor's frame and mounting plates for its axles.
I fitted the tractor's flywheel cover with a hydraulic pump with capacity of up to 20 gpm's. It came off a Deere 7700 combine and provides enough power to operate both the loader and tractor's steering which I converted to power by installing a power steering ram from a Minneapolis Moline tractor. I use a single control valve on each side of the tractor, mounted on the inside of the fenders. Spool faces down so I could put flatbar from the spool down to the foot pedals I made for the tractor.
The project - including tractor and loader - cost only about $1,800 and gave me a tractor that's worth its weight in gold. I use it al-most every day to move dirt, etc., around the farm. (Larry Brown, Box 20, Site 7, R.R. 1, Grande Prairie, Alberta, Canada T8V 2Z8; ph 403 532-0178).
To read the rest of this story, download this issue below or click
here to register with your account number.