Modular Poly Spill Containment System
 ✖  |
“Our new modular poly wall system provides low cost spill containment for fuel, fertilizer and water tanks. It doesn’t require any excavation or anchoring system at all,” says Robert Nightwine, PolyStar Containment, Twinsburg, Ohio. He says a new Federal guideline requires secondary containment of fuel tanks by March 2013.
The Poly Dike MPE uses 4-ft. wide by 3- ft. tall molded poly wall panels to construct a variety of container sizes and capacities. Each wall panel weighs about 49 lbs., except for the corner pieces that weigh 85 lbs. To attach 2 wall panels together you simply line up holes along the sides and then drop a locking pin into place.
After setup is complete, a flexible liner (not included) is rolled out and draped over the walls. Fiberglass clips hold the liner in place.
“Two people can set up a large containment area in less than an hour, and quickly move it if necessary, as opposed to a concrete spill containment system,” says Nightwine. The wall panels nest and stack for storage when not needed.
Panels sell for $270; corner sections for $443. The price includes all necessary components.
Contact: FARM SHOW Followup, Polystar Containment, 2030 Midway Dr., Twinsburg, Ohio 44087 (ph 800 275-3453 or cell 216 406-5887; sales@polystarcontainment.com; www.PolystarContainment.com).
Click here to download page story appeared in.
Click here to read entire issue
Modular Poly Spill Containment System MISCELLANEOUS EQUIPMENT Miscellaneous “Our new modular poly wall system provides low cost spill containment for fuel fertilizer and water tanks It doesn’t require any excavation or anchoring system at all ” says Robert Nightwine PolyStar Containment Twinsburg Ohio He says a new Federal guideline requires secondary containment of fuel tanks by March 2013 The Poly Dike MPE uses 4-ft wide by 3- ft tall molded poly wall panels to construct a variety of container sizes and capacities Each wall panel weighs about 49 lbs except for the corner pieces that weigh 85 lbs To attach 2 wall panels together you simply line up holes along the sides and then drop a locking pin into place After setup is complete a flexible liner not included is rolled out and draped over the walls Fiberglass clips hold the liner in place “Two people can set up a large containment area in less than an hour and quickly move it if necessary as opposed to a concrete spill containment system ” says Nightwine The wall panels nest and stack for storage when not needed Panels sell for $270; corner sections for $443 The price includes all necessary components Contact: FARM SHOW Followup Polystar Containment 2030 Midway Dr Twinsburg Ohio 44087 ph 800 275-3453 or cell 216 406-5887; sales@polystarcontainment com; www PolystarContainment com
To read the rest of this story, download this issue below or click
here to register with your account number.
