2012 - Volume #BFS, Issue #12, Page #82
Sample Stories From This Issue | List of All Stories In This Issue  | Print this story ]

    «Previous    Next»
Kile Rotor Thresh Bars
The Kile™ high performance patent-pending Thresh Bars improve rotor thresh for AFX/Specialty rotors. With the wider area the Kile Thresh Bars feed the crop to the concave to perform a more complete thresh. The primary bars are the K504 or K506.
  The K506’s unique aggressive face area with extended rasped ramp is our bar designed for large seed, slower turning rotors, recommended for soybeans and corn. Horsepower requirements are reduced. Seed and seed coat damage significantly minimized for better grade. (This all purpose bar and can be used for other crops.)
  The K504 bar is our primary bar designed for hard thresh small grains associated with high RPM rotor speeds. With the wider bar area, featuring deeper grooves and wider rasps on the face than OEM, more contact occurs on the concave allowing more crop to rub on itself for a more complete thresh, reducing over-thresh, minimizing seed crack and reduced white caps. (This all purpose bar can be used for other crops.)
  The K505 or K503 bars (can be viewed on our website) are considered to be complimentary secondary bars to the K504 and K506. Used to ‘tune’ the rotor, enhancing separation and thresh, for special circumstances as conditions require. These bars feature either a reverse angle or combination of standard and reverse angle, placed in non-specific areas to enhance performance.
  Features of the Kile Thresh Bars:
•  Reduces over-threshing
•  Wider bar
•  50% larger surface area per bar than OEM
•  40 degree ramp angle
•  larger surface area on ramp than OEM
•  enhances the separation of material for a cleaner tank sample
•  work well in all crops
•  aggressive yet gentle on crop
•  made in the USA
•  cast chrome alloy (high impact resistant) excellent wearability
Similar bars are also available for Case IH small tube rotors. Visit Kile’s website for pricing and current dealer list.
  Contact: FARM SHOW Followup, Kile Machine and Manufacturing, Inc., 401 Squires Road, Rosalia, WA. 99170 (ph 509 569 3814; info@kilemfg.com; www.kilemfg.com).

  Click here to download page story appeared in.

To read the rest of this story, download this issue below or click here to register with your account number.
Order the Issue Containing This Story
2012 - Volume #BFS, Issue #12