U.S.-Built Pellet Mill Manufacturer Introduces New Home Owner Unit
 ✖  |
Buskirk Engineering made its debut to the market place with its popular 8 and 12-in. PTO Pellets Mills in December of 2008 after several years of research and development. Kevin Riley, Sales Manager for Buskirk Engineering says, “Our American-made flat die design is different than the Asian mills on the market, which were designed for manufacturing feed but are used for biomass densification with mixed results.”
According to Riley, Buskirk Engineering pellet mills employ features not seen with other competitors on the market. “Low speed, high torque, a stationary case-hardened die, case-hardened rollers, and a higher material dwell time are features that make the Buskirk pellet mill the best unit available,” says Riley.
The 6-in. PTO uses the same pelletizing chamber and components as the 8-n. PTO. As well, all three PTO models (6, 8, and 12-in.) use the same robust gearbox, frame, and 3 point hitch system. Each sized model comes in an electric motor version as well, from the 6-in. 5 hp Model to the 12-in. 30 hp model.
“Capacity needs for the home owner are lower, as well as the price point”, says John Buskirk, President and CEO of Buskirk Engineering. “Consequently, we designed the 6-in. with the homeowner in mind, and the university which has need for a lower capacity, higher quality pellet mill.”
The PM6PTO 6-in. Pellet Mill sells for $3,990.00. For those wanting to utilize the motorized version, the PM605 Pellet Mill with a single phase 5 hp motor with a variable frequency drive for speed control is available for $4,500. The PM605 with a 3 phase 5 hp motor is available for $3,990.
Along with the single pellet mills, Buskirk Engineering introduced the Modular Densification System to the market place in April of 2010. The modular system allows the pellet manufacturer the ability to produce biomass pellets with a turn-key system. The system utilizes a hammer mill, air delivery system, pellet mill, conditioner and pellet cooling conveyor.
Crop residues and waste stream materials can be pelletized at capacities ranging from 500 lbs per hour to 2 tons per hour at a fraction of the cost of competing ring die pellet mills. The modular system utilizes a small footprint, lower energy requirements, and less manpower than competing large scale systems.
Plants available are the Single, Dual, Quad, and Dual-Quad PM1230 Densification Systems. Modular systems start at $23,400.
As North America’s leading Flat Die Pellet Mill Manufacturer, Buskirk Engineering is poised to lead the market in systems made available to the business entrepreneur looking to capitalize on the new Renewable Energy Initiatives developed by the nation’s legislators.
Those interested in capitalizing on this unique opportunity may gather more information by contacting the company.
Contact: FARM SHOW Followup, Buskirk Engineering Inc., 7224 E 900 N, Ossian, Indiana 46777 (ph 260 622-5550 ext. 7013; sales@buskirkeng.com; www.buskirkeng.com).
Click here to download page story appeared in.
U S -Built Pellet Mill Manufacturer Introduces New Home Owner Unit ENERGY Wood Burners 65 Buskirk Engineering made its debut to the market place with its popular 8 and 12-in PTO Pellets Mills in December of 2008 after several years of research and development Kevin Riley Sales Manager for Buskirk Engineering says “Our American-made flat die design is different than the Asian mills on the market which were designed for manufacturing feed but are used for biomass densification with mixed results ” According to Riley Buskirk Engineering pellet mills employ features not seen with other competitors on the market “Low speed high torque a stationary case-hardened die case-hardened rollers and a higher material dwell time are features that make the Buskirk pellet mill the best unit available ” says Riley The 6-in PTO uses the same pelletizing chamber and components as the 8-n PTO As well all three PTO models 6 8 and 12-in use the same robust gearbox frame and 3 point hitch system Each sized model comes in an electric motor version as well from the 6-in 5 hp Model to the 12-in 30 hp model “Capacity needs for the home owner are lower as well as the price point” says John Buskirk President and CEO of Buskirk Engineering “Consequently we designed the 6-in with the homeowner in mind and the university which has need for a lower capacity higher quality pellet mill ” The PM6PTO 6-in Pellet Mill sells for $3 990 00 For those wanting to utilize the motorized version the PM605 Pellet Mill with a single phase 5 hp motor with a variable frequency drive for speed control is available for $4 500 The PM605 with a 3 phase 5 hp motor is available for $3 990 Along with the single pellet mills Buskirk Engineering introduced the Modular Densification System to the market place in April of 2010 The modular system allows the pellet manufacturer the ability to produce biomass pellets with a turn-key system The system utilizes a hammer mill air delivery system pellet mill conditioner and pellet cooling conveyor Crop residues and waste stream materials can be pelletized at capacities ranging from 500 lbs per hour to 2 tons per hour at a fraction of the cost of competing ring die pellet mills The modular system utilizes a small footprint lower energy requirements and less manpower than competing large scale systems Plants available are the Single Dual Quad and Dual-Quad PM1230 Densification Systems Modular systems start at $23 400 As North America’s leading Flat Die Pellet Mill Manufacturer Buskirk Engineering is poised to lead the market in systems made available to the business entrepreneur looking to capitalize on the new Renewable Energy Initiatives developed by the nation’s legislators Those interested in capitalizing on this unique opportunity may gather more information by contacting the company Contact: FARM SHOW Followup Buskirk Engineering Inc 7224 E 900 N Ossian Indiana 46777 ph 260 622-5550 ext 7013; sales@buskirkeng com; www buskirkeng com
To read the rest of this story, download this issue below or click
here to register with your account number.
