New T-Post Driver Hits The Market
 ✖  |
These new T-Post Drivers have caused quite a stir in the farming community. What wasn’t known was how surprisingly different they are. Any T-post driver can be used to build new fence. The Bucke-T-Drivers also works great at rebuilding back old fencerows.
Your tractor loader lifts the Driver-5 and T-post up and over to clear the fence and then back down into position. You just move forward down your fence placing each post by pressing down to your set mark or have a chain stretched near the Driver at the correct T-post length. When the tip of the chain touches dirt the post is down to the correct depth. Each T-post will stay in place by just lifting the Driver-5 back up.
Reach up into your bucket and pull out another new T-post. To reset post into empty Driver-5 Barrel, just lift new post back up into barrel and the T-post snaps in automatically. That’s a feature not found on other T-post drivers.
A video on the internet at YouTube shows operation. Go to www.youtube.com and search up “Tee Post Drivers”. You’ll also be able to compare other T-post driver companies to see how Bucke-T-Drivers stack up.
The picture at right is our Driver-4. It’s sold to farm operations that reuse a lot of seasoned posts that have had the tops smeared over or beaten down.
For more info and to order please visit www.bucketdriver.com or call 580-747-9288.
Click here to download page story appeared in.
New T-Post Driver Hits The Market FENCING Miscellaneous These new T-Post Drivers have caused quite a stir in the farming community What wasn’t known was how surprisingly different they are Any T-post driver can be used to build new fence The Bucke-T-Drivers also works great at rebuilding back old fencerows Your tractor loader lifts the Driver-5 and T-post up and over to clear the fence and then back down into position You just move forward down your fence placing each post by pressing down to your set mark or have a chain stretched near the Driver at the correct T-post length When the tip of the chain touches dirt the post is down to the correct depth Each T-post will stay in place by just lifting the Driver-5 back up Reach up into your bucket and pull out another new T-post To reset post into empty Driver-5 Barrel just lift new post back up into barrel and the T-post snaps in automatically That’s a feature not found on other T-post drivers A video on the internet at YouTube shows operation Go to www youtube com and search up “Tee Post Drivers” You’ll also be able to compare other T-post driver companies to see how Bucke-T-Drivers stack up The picture at right is our Driver-4 It’s sold to farm operations that reuse a lot of seasoned posts that have had the tops smeared over or beaten down For more info and to order please visit www bucketdriver com or call 580-747-9288
To read the rest of this story, download this issue below or click
here to register with your account number.
